november online auction

Bruce Schapansky Auctioneers Inc.

27 November, 2018 8:00 am

ONLINE ONLY
AUCTION 


BIDDING OPENS
Tuesday November 20th @ 8:00 am
BEGINS CLOSING
Tuesday November 27th @ 8:00 am

CONSIGN YOUR FARM DISPERSALS,
TRACTORS, COMBINES, SWATHERS, TRUCKS,
RV'S, ATV'S & MORE! 

306-873-5488 

 

GRAIN PUMP:

 

The grain moving mechanism consists of an encased chain and paddles, 2 horizontal runs, 2 vertical runs and 4 – 90° corners. The paddles are notched to facilitate the chain moving around the big sprockets in the corners within the system. The Hutchinson Grain Pump is a totally enclosed and sealed system, the most innovative system made today.

The chain and paddles in the Hutchinson Grain Pump move the grain en masse in the round conveying chamber, resulting in gentler grain handling and the consumption of less power to move the same amount of grain.

This arrangement facilitates a number of grain handling operations within a single system.

Inload/outload, blending, turning, and offline functions are all easily accomplished with one simple system. The systems modularity also provides for easy expansion as demands change.

Because of the conveyor chain, the system must run in a straight line between the sprocket corners. Although a number of functions can be provided for, the straight-line requirement remains constant.

Grain exits the system through a manual or electric switch-controlled top discharge gate. The function of top discharge gates is to change the direction of grain flow with minimal stress on the system. It slows the grain down as it is being directed into the bin or back to the truck at a 90° angle.

At the bottom, material can be fed back into the system from bins through a hopper discharge transition mechanism. This promotes smooth, controlled grain flow, and avoids grain hang-up.

The top discharge gate and the bottom hopper discharge transition are only two of a whole host of ways to get product into and out of the system. You can enter or exit the system with gravity from bins, trucks, spouts or by augers, chain conveyors, truck hoppers, and railcar loaders/unloaders, to name only a few.

Features

  • One or both top corners will have reducer drives with electric motors, depending on the length and height of the system.
  • One bottom corner will be the inspection corner leaving one or two standard sprocket corners.
  • Automatic Chain Tightener (on the inspection corner)
  • Motor Mount(s) and pulley(s)
  • Sheaves
  • Drive Belts
  • Safety Guards
  • Housing Connectors
  • Corners include 12 gauge entrance and exit tubes
  • All tubing is 12 gauge or thicker

All components are galvanized steel or powder coated.

Photo Gallery

Disclaimer:

Announcement: Information contained herein is presented on behalf of the seller. Bruce Schapansky Auctioneers Inc., agent for the seller, cannot guarantee the information to be correct or assume the liabilities for errors and omissions. All lines drawn on maps are approximate. Buyers should verify the information to their own satisfaction. Any announcements made from the auction block on day of auction will take precedence over any matter of print and will be final.