LETHBRIDGE Machinery and Equipment Consignment Auction Sale

Early Consignments Include:

TRACTORS
1-Case Steiger STX 530 HD triple, Has 6 hydraulic banks with rear weight package, 3172 hrs, good rubber all around.

1-2004 JD 790 Tractor 27HP 4WD 3PTH Diesel w/hydraulics and set up for front end loader. One owner only 210HRS

1-Frontier RT1160 60” rototiller 3PTH only used 1HR

1-Frontier GM1072R 72” finishing mower 3PTH 150 HRS

1-1972 IHC 1066, CAHR, tilt steering, 8 speed transmission, TA, 540/1000 PTO, 18.4-38 factory duals, 5238 engine hours (unverified), c/w IHC 2350 Mount-O-Matic FEL, 6 foot bucket, S/N:20800

1-BELARUS 820 diesel, cab, FWA, 3PTH, PTO, 2 hydraulics, 15.5-38 rear tires, S/N:049764 note; new engine replaced  in 2017, HP is 150 on new engine

1-EZEE-ON FEL

1-24.5-32R-1 tractor tire on rim

2-18.4-34 tractor tires on rims

 

 

TRUCKS AND TRAILERS
1-2010 DODGE 3500, Crew Cab, 6.7L CUMMINS engine, auto, 4×4, single wheel, c/w DEW EZE pivot squeeze bale deck, 6.5 ft, electric/hydraulic controls, GN hitch, receiver hitch, 332082 kms, VIN:3D73Y3CL0AG145863

1-2008 F350 lariat, fully loaded, sun roof all interior full load package, 6.4 power struck diesel,
goose neck hitch in box, tonneau box cover, 270000 km, every option works

1-1990 GMC 2500 regular cab, long box, 350 V8, auto, 4×4, receiver hitch, trailer brake, 299920 kms (unverified), VIN:1GTGK24K8LE525072

1-1989 FORD F250 regular cab, long box, 7.5L V8 gas engine, 4×4, new tires, 246xxx kms, VIN:2FTHF26G3KCB11784

1-FEATHERLITE enclosed car hauler tandem axle GN trailer, 25 foot w/ 6 foot over hitch, aluminum checkerplate floor, D-rings in floor, interior lights, ramp door, side door, 2 landing jacks, VIN:HF682986

1-Big truck bumper (MACK or FORD)

1-Steel truck deck w/lights, tool boxes, 8.5’ x 12’

3-1000×20 tires on BUDD rims

20-10R22.5 tires on BUDD rims

8-11R22.5 tires on BUDD rims

3-11R24.5 grip tires on DAYTON rims

1-JACKSON tandem axle stock trailer, note; new floor, new rubber, new trailer wiring. registration not provided

1-Utility trailer, 8’x10’ w/OH racks, cross box tool box

 

SEEDING AND TILLAGE
1-Frigstad 55’ cultivator, chisel plow c/w anhydrous cold flow kit

1-GRAHAM HOEME cultivator, 10 foot w/mounted tine harrows

1-Tool bar, 12 row JD planter w/cans-beans, corn, sugar beet plates

14-V packer wheels for BOURGAULT 3320 drill

Quantity of used BOURGAULT openers

Quantity of miscellaneous parts for BOURGAULT 5710

 

 

HAYING AND HARVESTING
1-HESSTON 1340 discbine, hydro swing, S/N:134T00303

1-CIH 8465 round baler, twine tie, gathering wheels, bale kicker, hydraulic pickup, 1000 PTO drive, short crop kit, done approximately 7000 bales, shedded

1-JOHN DEERE Turbo 7720 SP combine, diesel, hydrostatic drive, pickup header, straw chopper, 4782 engine hours

1-6 row bean cutter

1-6 row bean rod

3-Rolls of baler belt

8-Bale fork teeth

 

GRAIN HANDLING

5-Grain bin sheets

6-Grain bin rings

1-Roof package for 27 foot bin w/manhole

6-Roof sheets for 19 foot bin

2-Pallets of aeration supports

2-Pieces of auger flighting

 

LIVESTOCK EQUIPMENT
1-BEARCAT 1260A mixmill,1000 rpm PTO, hammermill, rollermill, bale feeder, loading/unloading augers

1-Single axle fencepost trailer (follows post pounder)

1-POWDER RIVER manual squeeze

1-HI HOG trimming chute auto headgate

1-Calf tipping table

1-Calf puller

1-Portable loading chute

3-Livestock panels, 10 foot

2-Wooden feed troughs

2-Salt block stands

3-Plastic stock tanks

Quantity of free standing panels

Quantity of free standing panels with gates

Feed Bunk

2-Calf shelters

Steel 2 and 3 bale feeders

30’ bunk feeders

Quantity of fence posts

31-Free standing steel panels w/5 bars (1 inch diameter), 24 foot

5-Free standing steel panels w/gate, 24 foot

1-Nitrogen pot

2-Sets of dehorners

1-Electric fan

1-Branding pot

1-Steel gate, 12 foot

3-Tombstone feeders

3-Grain troughs, 10 foot

1-Steel trough

10-Grader blades for fence posts

Quantity of barb wire

16-Treated fence posts, 8 foot

Quantity of meat hooks w/ rollers

 

 

 

CONSTRUCTION

1-Portable truck scale, 10’x30’ deck c/w scale head, printer, inverter

 

TANKS
1-Slip tank w/hand pump

1-Slip tank w/pump, 75 gallon capacity

1-Small fuel tank

1-Aluminum rectangular slip tank, 230 litre capacity

 

SHOP
1-Propane gas welder, handcart

1-RODENATOR w/gauges and hoses

1-Genset

1-Box of shop supplies

Pallet of pallet of HD pallet racking

Quantity of pumps; 1- Grundfos NP50 end suction centrifugal pump, 2” x 1-1/4” connections, 3 HP/1 ph/115-230V/TEFC motor.
1-Franklin 15FMH horizontal end suction multistage pump, 1-1/4” x 1” connections, ¾ HP/1 ph/115-230V ODP motor.
1-Franklin 5DB1 end suction centrifugal pump, 1-1/2” x 1” connections, 5 HP/1 ph/115-230V ODP motor. Rated performance 70 GPM at 50 psi,
1-Grundfos CR5-10 vertical multistage centrifugal pump, 1-1/4” x 1-1/4” connections, 3 HP/3 ph/208-230-460V/TEFC motor.

Quantity of tools

RECREATIONAL EQUIPMENT
1-14’ Aluminum fishing boat w/trailer

1-Wood Stove

 

 

 

LAWN AND GARDEN

1-FORD LGT 165 tractor w/48” belly mount mower, hydrostatic drive, PTO, gasoline engine, needs engine tune up